Integrated direct cooling photovoltaic energy storage system
Product classification:
Energy storage systemESS
Keyword:
Energy Storage System ESS
Product Features
● Installed capacity ≤100kWh, with 0.4kV access, recommended integrated direct cooling photovoltaic energy storage system
● Three-phase four-wire electrical design, support and off-grid switching
● Modular standard product design, plug and play
● Can be paralleled, can be used with photovoltaic systems and energy storage for DC coupling
● Adopt direct cooling design scheme, the system is safe and efficient
● Three-phase four-wire electrical design, support and off-grid switching
● Modular standard product design, plug and play
● Can be paralleled, can be used with photovoltaic systems and energy storage for DC coupling
● Adopt direct cooling design scheme, the system is safe and efficient
Product details
| system parameters | |
| Battery type | LFP 3.2V/100Ah |
| System Rated Energy (kWh) | 50 | 100 |
| System Voltage Range | DC 150~750V, full power above 350V |
| AC side rated power (kW) | 30 | 60 |
| Depth of discharge | 95% |
| Maximum System Efficiency | 88% |
| Communication interface | CAN/RS485/LAN |
| Protection class | IP55 |
| Noise | <70dB |
| Thermal management technology | Direct cooling |
| Fire system | Kechuang special fire fighting gas |
| Dimensions (L×D×H) mm | 925×750×2300 | 1510×750×2300 |
| Weight (t) | 1.86 | 3.7 |
| AC side parameters | |
| Rated Voltage/Rated Voltage Range | 380V/380V±10% |
| Nominal Frequency/Nominal Frequency Range | 50Hz/50±2.5Hz |
| Power Factor | ≥0.99 (rated power) |
| Current Distortion Rate | <3% |
| Photovoltaic side | |
| AC side rated power (kW) | 45 | 90 |
| Maximum input voltage (V) | 830 |
| Start voltage (V) | 250 |
| MPPT voltage range (V) | 200~810 (430~750@full load) |
| Number of MPPTs | 3 | 6 |
| Maximum output current of each MPPT (A) | 35 | 35A |
| Maximum parallel number of single MPPT | 2 | 4 |
Product message